Kia Sedona 2010 Manuel d'utilisateur télécharger pdf (Page 339)

633

Maintenance

Remove the valve cap from the tire

valve stem. Press the tire gage firm-

ly onto the valve to get a pressure

measurement. If the cold tire inflation

pressure matches the recommended

pressure on the tire and loading

information label, no further adjust-

ment is necessary. If the pressure is

low, add air until you reach the rec-

ommended amount.

If you overfill the tire, release air by

pushing on the metal stem in the

center of the tire valve. Recheck the

tire pressure with the tire gage. Be

sure to put the valve caps back on

the valve stems. They help prevent

leaks by keeping out dirt and mois-

ture.

Tire rotation

To equalize tread wear, it is recom-

mended that the tires be rotated

every 12,000 km (7,500 miles) or

sooner if irregular wear develops.

During rotation, check the tires for

correct balance.

When rotating tires, check for uneven

wear and damage. Abnormal wear is

usually caused by incorrect tire pres-

sure, improper wheel alignment, out-

of-balance wheels, severe braking or

severe cornering. Look for bumps or

bulges in the tread or side of tire.

Replace the tire if you find either of

these conditions. Replace the tire if

fabric or cord is visible. After rotation,

be sure to bring the front and rear tire

pressures to specification and check

lug nut tightness.

Refer to Section 7, Specifications.

S2BLA790

S2BLA790A

CBGQ0707A

Without a spare tire

With a full-size spare tire (if equipped)

Directional tires (if equipped)

1 2 ... 334 335 336 337 338 339 340 341 342 343 344 ... 359 360

Commentaires sur ces manuels

Pas de commentaire