Kia Sedona 2010 Manuel d'utilisateur télécharger pdf (Page 319)

613

Maintenance

AIR CLEANER

Element replacement

Have the air cleaner element checked

and replaced in accordance with the

maintenance schedule.

Checking the automatic transaxle

fluid level

The automatic transaxle fluid level

should be checked regularly.

Keep the vehicle on the level ground with

the parking brake applied and check the

fluid level according to the following pro-

cedure.

1. Place the selector lever in N (Neutral)

position and confirm the engine is run-

ning at normal idle speed.

2. After the transaxle is warmed up suffi-

ciently (fluid temperature 70~80°C

(158~176°F)), for example by 10 min-

utes usual driving, shift the selector

lever through all positions then place

the selector lever in N (Neutral) or P

(Park) position.

3. Confirm that the fluid level is in “HOT”

range on the level gauge. If the fluid

level is lower, add the specified fluid

from the fill hole. If the fluid level is

higher, drain the fluid from the drain

hole.

4. If the fluid level is checked in cold con-

dition (fluid temperature 20~30°C

(68~86°F) add the fluid to “COLD” line

and then recheck the fluid level

according to the above step 2.

OVQ066005N

WARNING - Engine

Driving without an air cleaner

encourages backfiring, which could

cause a fire in the engine compart-

ment.

CAUTION - Engine

Do not drive with the air cleaner

removed; this will result in exces-

sive engine wear.

AUTOMATIC TRANSAXLE

OVQ066011N

OVQ056002

COLD

HOT

1 2 ... 314 315 316 317 318 319 320 321 322 323 324 ... 359 360

Commentaires sur ces manuels

Pas de commentaire